Animated promo videos

You wouldn’t heat your house without a roof and you shouldn’t heat water without a lid.

Did you know that the department of energy states that you can save 50-70% of your heating costs just by putting a lid on your water.

How is that possible? Everyone knows that water loses heat to the sky but did you know that 70% of heat is lost through evaporation. It only takes 1 Btu to raise 1 pound of water 1 degree, but each pound of 80ºF water that evaporates takes a whopping 1,048 Btu of heat out of the pool.

When evaluating water loss characteristics.
The Department of energy concluded that 70% is from evaporation, 20% is Radiation to the Sky. And the other 10% is losses to the ground and walls. With the Heat Keeper Lid system you can positively affect 90% of the total heat losses..

If cutting your daily heating costs by 50-70% isn’t enough the Heatkeeper Lid system also reduces the time it takes to get your water to temperature by over 50%. Lowering your heating costs even further while saving you time.

By conserving your energy you have the added insurance of knowing that if you experience delays on your project that your water temperatures will be maintained for a much longer
period of time without needing additional bumps or the cost of additional
heating.

By saving so much energy you are also dramatically reducing your carbon footprint. By eliminating evaporation you are saving water for the next generation. Two big wins for the environmental impact of your operations.

Protect the local wildlife and prevent contaminants from getting into your water supply. Clean water equals asset protection.

With the easy installation of the Heat Keeper Lid system there is no reason not to use one. Each section easily lays out and connects to the next section. Once all the pieces are secured the lid is inflated and floats easily on the water.
“The HeatKeeper Lid System can also be efficiently installed on tanks that are already full.”

“The patent-pending buoy/ballast system secures the lid inside the tank and has proven to withstand winds up to 100 km/hour.”

The lids are made from the most durable Industrial materials, resistant to damage or puncture, but with continuous positive air pressure even with a puncture the lid will always float.

With evaporation contributing to the greatest percentage of heat losses. If you are heating water. You need the Heat Keeper Lid system for every season of the year.

a) So what does saving 50-70% on your daily heating costs look like?
We’ve had customers experience savings of $20,000 per day, with one customer saving over $300,000 on one site.

b) How much do you save by reducing your initial heat time by 50%?
By storing your heat more efficiently large frac ponds can reach temperature up to 2 days sooner… with some customers saving up to $40,000.

c) What is your true positive impact on the environment by reducing your carbon footprint and reducing water consumption?
Super heaters can burn up to 1000 liters/hr. With the HeatKeeper Lid system you can save 10’s of thousands of liters of fuel from being consumed on most jobs. Depending on the environment you can also save 10’s of thousands of liters of water from leaving the local water supply.

d) Then you have the added insurance of knowing your water temperatures will hold for a longer period of time, the local wildlife is protected, and you prevent contaminants from getting into your water supply.

e) And you can avoid significant water & heat loss due to evaporation.

With all these benefits you have everything you need to make ThinkTank’s HeatKeeper Lid System a permanent part of your water storage solution.

Order now and start saving!

Contact ThinkTank Products Inc. today to reserve yours or have us calculate your heat savings using engineered heat calculations.

ThinkTank Products Inc.
Phone: 1.403.556.1991
www.thinktankpi.com

Order yours today.
Have us calculate your Savings.

if you need a similar animated advertisement video. please contact us at mailme (at) amodfilms dot com